SMART QUBIX HYDRO STARTER SET
The Smart Qubix Hydro starter set is a good way to start you digital garden. It measures the CO2 level, Temperature, Humidity and luminousity and EC and pH. With the Smart Sockets you can control your CO2 boosters/lights/irrigation pumps/fans. The Smart Qubix Hydro starter set contains the following:
- Smart Qubix Controller
- Smart Qubix Gateway Zigbee
- Smart Qubix Climate sensor
- Smart Qubix EC/pH sensor
- Smart Qubix Smart Sockets
CO2 SENSOR
|
|
Brand
|
SenseAir
|
Operating Principle
|
Non-dispersive infrared (NDIR)
|
Measurement range
|
0 to 5000 ppmvol
|
Accuracy
|
±30 ppm ±3% of reading
|
Response time (T1/e)
|
20 sec diffusion time
|
Rate of Measurement
|
0.5 Hz
|
Operating temperature
|
0 to +50 °C
|
Operating humidity
|
0 to 95% RH non condensed
|
Storage temperature
|
-30 to +70 °C
|
pH SENSOR
|
|
Sensor type
|
Combination electrode
|
Measurement range
|
0~14 pH
|
Temperature of operation
|
0~80 ºC
|
Zero electric potential
|
7±0.25 p
|
Response time
|
<0.5 mV
|
Noise
|
98.5
|
Alkali error
|
<0.5 mV
|
Reader accuracy
|
up to 0.01 (in function of calibration)
|
Cable length
|
~500 cm
|
|
|
CONDUCTIVITY SENSOR
|
|
Sensor type
|
Two electrodes sensor
|
Electrode material
|
Platinum
|
Conductivity cell constant
|
1 ± 0.2 cm-1
|
Cable length
|
~500 cm
|