SMART QUBIX SOIL SENSOR ZIGBEE

The Smart Qubix Soil Sensor is a satellite box which can be wirelessly connected to the controller using the Zigbee Gateway and has the following sensors:

- Soil moisture
- Soil temperature

SOIL MOISTURE SENSOR:
The Smart Qubix Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.

SOIL TEMPERATURE SENSOR:
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground).

The Smart Qubix 24V Dry Contact, is actuator which can switch 4 contacts.

Use this device with NO-NC contacts to switch relais of fans, pumps etc.

When using the Zigbee Gateway (optional) it can be wireless connected to the controller.

The Smart Qubix Smart Sockets is a satellite unit which can be wirelessly connected to the controller using the Zigbee Gateway and has two power sockets.
Connected to the controller it can switch the sockets on and off.

Specifications
- Total current : 110V/230V maximum16 amperes
- 2 Sockets: combined 16 Amperers
- Sockets can be operated separately

The Smart Qubix EC/PH sensor is a satellite unit which can be wireless connected to the controller when using the Zigbee Gateway and has the following sensors:

- EC Sensor
- PH Sensor
- Water Temperature Sensor

The Smart Qubix Climate Sensor is a satellite unit which can be wirelessly connected to the controller using the Zigbee Gateway and has the following sensors:

- Temperature
- Humidity
- Luminosity
- CO2
- Barometric pressure

The Smart Qubix Gateway Zigbee is a satellite unit which creates a Zigbee wireless network.

Our sensors and actuators with Zigbee can be wireless connected to the controller through the Gateway.

The Smart Qubix Gateway Zigbee uses Zigbee IEEE802.15.4 industrial standard. It you allows to create a wireless mesh network between the satellite sensor boxes and/or activators.

The Smart Qubix Controller is the central hart of the Smart Qubix System.

The Controller runs the software and communicates with the satellite sensors and activators.

The Controller collects all data from the sensors in the pool, stores it locally or/and in the cloud.

Smart Sockets and/or 24V Dry Contacts can be used with the Controller to control peripheral equipment (lights, irrigation, fans, etc.) based on a schedular and/or sensor data and thresholds set related to specific parameters (temperature, humidity, etc.).

The Smart Qubix Controller can store data locally (e.g. if no Internet connection is available) or in the Cloud so the data can be accessed via a Web browser or mobile app.

Specifications
- 12V current
- 485 serial communication (hardwired)
- Zigbee IEEE802.15.4 standard with use of Zibee gateway (optional)
- 3.5" TFT touchscreen
- USB storage
- Ethernet
- Linux based